[asterisk-users] Asterisk and Panasonic TDA200

[Steve Underwood]

Carlos Chavez wrote:
> On Tue, 2007-07-03 at 23:50 -0400, C F wrote:
>   
>> Change it to ISDN. There is no point in not to, what card do you have
>> in the TDA200? A PRI or or just T/E1? Since it's too differenct cards
>> on the TDA200. In fact accroding to Panasonic CallerID isn't supported
>> on none PRI, although some have gotten it to work.
>>
>>
>>     
> 	The card on the TDA200 is a MFC/R2 E1 card, you cannot use ISDN.
> Obviously the customer is not willing to pay for an ISDN card.  The TDA
> received CID from the phone company without any problem, but it will not
> receive it from Asterisk.  If you enable CID on the TDA it will give a
> protocol error on the call.
>   
Send me a log from a call with CLI enabled and loglevel=255 and I will 
take a look.

Steve