[asterisk-users] Installed TDM02B - Problem when other end hangs up

[Carlos Rojas]

Hello,

Do you include in your zapata.conf

answeronpolarityswitch=yes
hanguponpolarityswitch=yes

There are any problems with hang up

Regards
On 1/29/07, Lee Jenkins <lee at datatrakpos.com> wrote:
>
>
>
> Hi everyone,
>
> I just installed a TDM02B and surprisingly, I had really no problems
> except one.
>
> If I place an outbound call on the Zap line (Zap/3), everything works
> fine except when the called party hangups before I do.  I do get
> congestion, but that is expected.  However, when I try to make another
> outbound call using that Zap line, the CLI shows that the call is being
> dialed, but nothing happens and I get the telco's message "if you'd like
> to make a call, hang up..." after a few seconds.
>
> If I call out to a party on that Zap line and hangup first, I do not
> experience that problem.  It looks like Asterisk is not getting the
> termination signal from the telco (Verizon) when the other party hangs
> up first.
>
> Running show channels at any time after the call is disconnected (by
> either party) shows 0 active calls/channels.
>
> When the problem occurs, calling that ZAP line from outside seems to
> reset it as well.
>
> I'm sure it's something obvious I've overlooked, but I'd appreciate any
> pointers.
>
> Thank you,
>
> --
>
> Warm Regards,
>
> Lee
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070129/8869331a/attachment-0001.htm