[asterisk-users] X100P - zttools says red status

[Charlie Grosvenor]

Yes the line is connected, a standard phone works fine when connected to
the line.

Thanks

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tzafrir
Cohen
Sent: 26 January 2007 23:45
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] X100P - zttools says red status

On Fri, Jan 26, 2007 at 08:42:36PM -0000, Charlie Grosvenor wrote:
> I have an X100P which I have set up as per the guidelines:
> 
> http://www.x100p.com/support/doc/quick_start_fxo.php
> 
> The card is recognized by the system:
> 
> "Zaptel Version: 1.4.0
> 
> Echo Canceller: MG2
> 
> Configuration
> 
> ======================
> 
>  
> 
>  
> 
> Channel map:
> 
>  
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> 
>  
> 
> 1 channels configured."
> 
>  
> 
> However when I run zttools it says its status is red, which my
> understanding of is that it has not detected the line. I am in the uk
> and using a standard BT line (with ADSL). Any suggestions?

Is the line plugged in? Can you connect a standard phone to the same
line?

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users