[asterisk-users] Asterisk + Unicall + Telmex E1 MFC/R2 Argentina + Meridian

[Moises Silva]

Similar probles I had were fixed incrementing one of the timers, but
if you have already done that, I have no idea of your problem, you
require to debug the problem and try to find some consistence in the
failures, find if the failure is on the Asterisk -> telco Link, or in
the Asterisk -> meridian link? find if putting in loop your own
asterisk still fails, etc etc.

Kind Regards

On 1/18/07, Facundo Ameal <fameal at gmail.com> wrote:
> Thanks for your help, but I've already adjusted timers on the source
> code. I found your document a week ago and read it.
> Do you really think that is a matter of timers only?
>
> Greets!
>
> On 1/18/07, Moises Silva <moises.silva at gmail.com> wrote:
> > Sometimes timers need to be adjusted on the mfcr2 source code.
> > Sometimes is missconfiguration. Anyway, may be this document can help
> > you out to debug the problem:
> >
> > http://moy.ivsol.net/unicall/mfcr2-asterisk-unicall-0.2-english.pdf
> >
> > Kind Regards
> >
> > On 1/17/07, Facundo Ameal <fameal at gmail.com> wrote:
> > > Hi everyone!
> > > I'm having some issue trying to place calls with asterisk connected to
> > > an E1 R2 from Telmex Argentina. The other E1 port is connected to a
> > > Meridian which also uses R2 protocol. Calls sometimes fail with
> > > different error messages such as: Unicall protocol error 32773, 32772,
> > > 32769. Some other calls fail saying:
> > >                            Far end disconnected(cause=Destination out
> > > of order [27])
> > >                            Far end disconnected(cause=User alerting,
> > > no answer [19])
> > >                            Far end disconnected(cause=Switching
> > > equipment congestion [42])
> > >                            Far end disconnected(cause=User busy [17])
> > >
> > > I don't think those causes are real, because if you use another line,
> > > yo establish the call. Could it be something about timing of ABCD
> > > bits?
> > >
> > > I'm using:
> > > Asterisk 1.2.6
> > > Zaptel 1.2.5
> > > libmfcr2 0.0.3
> > > libunicall 0.0.3
> > > libsupertone 0.0.2
> > > spandsp-0.0.3
> > >
> > > And this is my unicall.conf:
> > >
> > > [channels]
> > > loglevel=1023
> > > usecallerid=yes
> > > hidecallerid=no
> > > callwaitingcallerid=yes
> > > threewaycalling=yes
> > > transfer=yes
> > > cancallforward=yes
> > > callerid=asreceived
> > > callreturn=yes
> > > echocancel=no
> > > echocancelwhenbridged=no
> > > echotraining=no
> > > rxgain=0.0
> > > txgain=0.0
> > > callgroup=1
> > > pickupgroup=1
> > > immediate=no
> > >
> > > musiconhold=default
> > > protocolclass=mfcr2
> > > protocolvariant=ar,10,4,15
> > > protocolend=cpe
> > > group=1
> > > context=from-zaptel
> > > channel => 1-15
> > > channel => 17-29
> > >
> > > loglevel=0
> > > usecallerid=yes
> > > hidecallerid=no
> > > callwaitingcallerid=yes
> > > threewaycalling=yes
> > > transfer=yes
> > > cancallforward=yes
> > > callerid=asreceived
> > > callreturn=yes
> > > echocancel=yes
> > > echocancelwhenbridged=yes
> > > echotraining=yes
> > > rxgain=0.0
> > > txgain=0.0
> > > callgroup=1
> > > pickupgroup=1
> > > immediate=no
> > >
> > > protocolclass=mfcr2
> > > protocolvariant=ar,0,12,12
> > > protocolend=cpe
> > > group=2
> > > context=hacia-afuera
> > > channel => 32-46
> > > channel => 48-60
> > >
> > >
> > > Thanks in advance!
> > >
> > > Greets!
> > >
> > >
> > >
> > > --
> > > Facundo Ameal.
> > > fameal<at>gmail<dot>com
> > > Linux User #395088
> > >
> > > Share your knowledge, use free software.
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > asterisk-users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> > --
> > "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> --
> Facundo Ameal.
> fameal<at>gmail<dot>com
> Linux User #395088
>
> Share your knowledge, use free software.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
"Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"