[asterisk-users] libpri Calling Line ID

[Michael Konietzny]

Hey users,

i've got a question about calling line id in libpri - zaptel with 
switchtype "q.sig". My Q.Sig partner is a Siemens F900 (HiPoint). If I 
enable
span debug i see messages from type "CONNECT" with some kind of bit field:

< Protocol Discriminator: Q.931 (8)  len=87
< Call Ref: len= 2 (reference 86/0x56) (Terminator)
< Message type: CONNECT (7)
< [1c 1d 9f aa 06 80 01 00 82 01 00 8b 01 00 a1 0f 02 02 4b 36 02 01 55 
30 06 82 04 06 1c 08 40]
< Facility (len=31, codeset=0) [ 0x9f, 0xaa, 0x06, 0x80, 0x01, 0x00, 
0x82, 0x01, 0x00, 0x8b, 0x01, 0x00, 0xa1, 0x0f, 0x02, 0x02, 'K6', 0x02, 
0x01, 'U0', 0x06, 0x82, 0x04, 0x06, 0x1c, 0x08, 0x40 ]
< [1c 29 9f aa 06 80 01 00 82 01 00 8b 01 00 a1 1b 02 02 4b 45 02 01 02 
a1 12 04 0d 4e 4f 52 44 4d 41 4e 4e 2c 45 52 49 43 02 01 01]
< Facility (len=43, codeset=0) [ 0x9f, 0xaa, 0x06, 0x80, 0x01, 0x00, 
0x82, 0x01, 0x00, 0x8b, 0x01, 0x00, 0xa1, 0x1b, 0x02, 0x02, 'KE', 0x02, 
0x01, 0x02, 0xa1, 0x12, 0x04, 0x0d, 'NORDMANN', 0x2c, 'ERIC', 0x02, 
0x01, 0x01 ]
< [4c 06 00 80 32 35 37 37]
< Connected Number (len= 8) [ Ext: 0  TON: Unknown Number Type (0)  NPI: 
Unknown Number Plan (0)
<                             Ext: 1 Presentation: Presentation 
permitted, user number not screened (0) '2577' ]


There is also a name included: "NORDMANN" "ERIC". Is there any way in 
asterisk to get this name in a variable or by any applikation command ?

Thanks for your help in advance!

Cheers,
 Michael Konietzny