[asterisk-users] HowTO configure voice T1

[David Gomillion]

T1s can use many different signalling types. You need to find out which one
is running, what the line encoding is, etc. PRI vs T1 are not the only
distinctions...


On 1/4/07, Mark Greene <markgreene at gmail.com> wrote:
>
> Alright guys here is my question. What is do I need to set switchtype, and
> signalling to in zapata for a voice T1. This is not a PRI. I cannot say that
> enough. It is NOT, A, PRI. It is just a Voice T1 with 24 voice channels.
> There is not a D Channel. It runs from one office to another and USED to
> plug into two opt. 11c but now one end is going to plug into an asterisk
> box.
>
> - Mark
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com <http://easynews.com/>--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070104/f7291926/attachment-0001.htm