[asterisk-users] Help Needed: Can't make "local" calls on a brand new PRI

[Matt]

right and the asterisk debug is showing it going out as 7 digits whch
the telco says is the way local should be dialed but yet the telco is
seeing extra zeros on the end.   we already know the ton is
wrong...the question is where are the extra digits coming from.

On 2/28/07, Nic Bellamy <nicb-lists at vadacom.co.nz> wrote:
> Mark Engelhardt wrote:
> > I just installed a PRI and when I make a local (seven digit) call, I
> > get Code 28 back from the telco, (I believe code 28 means "Invalid
> > Number") and I hear a fast busy on the phone.
> >
> > Here is the output:
> >     -- Executing Dial("SIP/marke-17b1", "ZAP/G1/4967171") in new stack
> >     -- Requested transfer capability: 0x00 - SPEECH
> >     -- Called G1/4967171
> >     -- Zap/23-1 is proceeding passing it to SIP/marke-17b1
> >     -- PROGRESS with cause code 28 received
> >     -- Zap/23-1 is making progress passing it to SIP/marke-17b1
> >
> > As you can see, asterisk is reporting 4967171 as the dialed number
> > (which is valid)
> Cause code 28 means "Invalid Number Format", and, if you're sure the
> number is correct, is often a case of you sending the wrong Type Of
> Number (TON) when setting up the call.
>
> Take a look at your pridialplan setting in zapata.conf - try "unknown"
> first, then other options until you find what works.
>
> A very very handy list I keep close to hand:
>
> http://www.quintum.com/support/xplatform/network/Q931_Disconnect_Cause_Code_List.pdf
>
> Cheers,
>     Nic.
>
> --
> Nic Bellamy,
> Head Of Engineering, Vadacom Ltd - http://www.vadacom.co.nz/
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>