[asterisk-users] No Caller ID Name PRI NI2
foucaulom at infofortin.com
foucaulom at infofortin.com
Wed Feb 28 15:03:16 MST 2007
I there,
I have some trouble to do working caller id name for outgoing calls on
the PRI we just installed. Caller id name work on incoming calls only.
Caller id number work on incoming and outgoing calls.
The provider, Goup Telecom, said that's in what i'm sending. They said
that I send the cid name in ascii code and to do it working, I need to
send it in hex.
So I take some traces but i'm unable to figure where is the problem.
What I see In case that work: incoming call:
< [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52
54 49 4e 20 46 41 58]
< Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16,
0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ]
PROTOCOL 1F
What I see in case that doesn't work: outgoing call:
> [28 05 b1 69 6e 66 6f]
> Display (len= 5) Charset: 31 [ info ]........
completes traces:
working:
< [ 02 01 da d6 08 02 02 34 05 04 03 80 90 a2 18 03 a9 83 81 1c 1c 9f
8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52 54 49 4e 20
46 41 58 1e 02 82 83 6c 0c 21 83 38 31 39 37 38 30 31 32 37 33 70 0b a1
38 31 39 33 34 30 30 39 37 37 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 109 0: 0
< N(R): 107 P: 0
< 76 bytes of data
-- ACKing all packets from 106 to (but not including) 107
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=76
< Call Ref: len= 2 (reference 564/0x234) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps,
circuit-mode (16)
< Ext: 1 User information layer 1: u-Law (34)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 1 ]
< [1c 1c 9f 8b 01 00 a1 16 02 01 01 02 01 00 80 0e 49 4e 46 4f 46 4f 52
54 49 4e 20 46 41 58]
< Facility (len=30, codeset=0) [ 0x9F, 0x8B, 0x01, 0x00, 0xA1, 0x16,
0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0E, 'INFOFORTIN FAX' ]
PROTOCOL 1F
8B 0001 00 (CONTEXT SPECIFIC [11])
A1 0016 (CONTEXT SPECIFIC [1])
02 0001 01 (INTEGER: 1)
02 0001 00 (INTEGER: 0)
80 000E 49 4E 46 4F 46 4F 52 54 49 4E 20 46 41 58 (CONTEXT SPECIFIC [0])
< [1e 02 82 83]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
(0) 0: 0 Location: Public network serving the local user (2)
< Ext: 1 Progress Description: Calling
equipment is non-ISDN. (3) ]
< [6c 0c 21 83 38 31 39 37 38 30 31 32 37 33]
< Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation allowed of
network provided number (3) '8197801273' ]
< [70 0b a1 38 31 39 33 34 30 30 39 37 37]
< Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8193400977' ]
-- Making new call for cr 564
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 28 (cs0, Facility)
Q.932 Interpretation component is not handled
Handle Q.932 ROSE Invoke component
[ Handling operation 0 ]
Handle Name display operation
Received caller name 'INFOFORTIN FAX'
-- Processing IE 30 (cs0, Progress Indicator)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
q931.c:3294 q931_receive: call 564 on channel 1 enters state 6 (Call Present)
Sending Receiver Ready (110)
> [ 02 01 01 dc ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 110 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
q931.c:2570 q931_call_proceeding: call 564 on channel 1 enters state 9
(Incoming Call Proceeding)
> [ 00 01 d6 dc 08 02 82 34 02 18 03 a9 83 81 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 107 0: 0
> N(R): 110 P: 0
> 10 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 564/0x234) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 81]
don't working:
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=54
> Call Ref: len= 2 (reference 13/0xD) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> Ext: 1 User information layer 1: u-Law (34)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
> [1e 02 80 83]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
> (0) 0: 0 Location: User (0)
> Ext: 1 Progress Description: Calling
> equipment is non-ISDN. (3) ]
> [28 05 b1 69 6e 66 6f]
> Display (len= 5) Charset: 31 [ info ]
> [6c 0d 21 80 31 38 31 39 33 34 30 33 31 32 38]
> Calling Number (len=15) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation permitted, user
> number not screened (0) '18193403128' ]
> [70 0b a1 38 31 39 35 37 33 30 39 31 33]
> Called Number (len=13) [ Ext: 1 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8195730913' ]
q931.c:2879 q931_setup: call 32781 on channel 1 enters state 1 (Call
Initiated)
Anyone had suggestion/comment welcome.
Thank you ad advance,
Loic
More information about the asterisk-users
mailing list