[asterisk-users] Help: CallerID Name not being sent on outbound PRI trunk

[Webster, Andrew]

Outbound calls on my Telus PRI aren't taking the Name portion of the
callerID. I've looked at the logs, and it is being set (see below), but
the PRI debug output doesn't show the name being sent anywhere. As a
result, received calls always display from Unknown (or just the number).
Is there some config that I've missed somewhere?

I'm running NI-1 (Telus says NI-2 doesn't support the name feature, so
they've changed my link type).
Version: Asterisk 1.2.14 svn rev 48468


Asterisk Log:
Executing Set("SIP/304-091aafb8", "CALLERID(all)=Andrew<nnnnnnnnnn>") in
new stack
(I've replaced the digits with n).

PRI debug shows:
> Protocol Discriminator: Q.931 (8) len=42
> Call Ref: len= 2 (reference 4/0x4) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a2]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
> Ext: 1 User information layer 1: u-Law (34)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive
Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
> [6c 0c 21 80 nn nn nn nn nn nn nn nn nn nn]
> Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation permitted, user number not screened (0)
'nnnnnnnnnn' ]

>From zapata.conf:
callerid=asreceived

;Sangoma A101 port 1 [slot:12 bus:0 span: 1]
switchtype=ni1
context=from-zaptel
overlapdial=yes
facilityenable=yes
group=0
signalling=pri_cpe
channel => 1-23

Thanks!
--
Andrew

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070228/24e6c41b/attachment.htm