[asterisk-users] Yellow or Red alarm on TE110P ????

[younss azzayani]

thank you all,
temporarly the problem is solved
i v set my zaptel.conf by modifing span line
span=1,0,0,ccs,ami
the yel/ok alarm was caused by ',crc4'
now when i m running zttool i get OK and the led comes green :)
i run "cat /proc/zaptel/1" & i get:
*********
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" AMI/CCS

           1 WCT1/0/1 Clear (In use)
           2 WCT1/0/2 Clear (In use)
           3 WCT1/0/3 Clear (In use)
           4 WCT1/0/4 Clear (In use)
           5 WCT1/0/5 Clear (In use)
           6 WCT1/0/6 Clear (In use)
           7 WCT1/0/7 Clear (In use)
           8 WCT1/0/8 Clear (In use)
           9 WCT1/0/9 Clear (In use)
          10 WCT1/0/10 Clear (In use)
          11 WCT1/0/11 Clear (In use)
          12 WCT1/0/12 Clear (In use)
          13 WCT1/0/13 Clear (In use)
          14 WCT1/0/14 Clear (In use)
          15 WCT1/0/15 Clear (In use)
          16 WCT1/0/16 HDLCFCS (In use)
          17 WCT1/0/17 Clear (In use)
          18 WCT1/0/18 Clear (In use)
          19 WCT1/0/19 Clear (In use)
          20 WCT1/0/20 Clear (In use)
          21 WCT1/0/21 Clear (In use)
          22 WCT1/0/22 Clear (In use)
          23 WCT1/0/23 Clear (In use)
          24 WCT1/0/24 Clear (In use)
          25 WCT1/0/25 Clear (In use)
          26 WCT1/0/26 Clear (In use)
          27 WCT1/0/27 Clear (In use)
          28 WCT1/0/28 Clear (In use)
          29 WCT1/0/29 Clear (In use)
          30 WCT1/0/30 Clear (In use)
          31 WCT1/0/31 Clear (In use)
******************************************
but i can't make or recive calls from this card it is normal "(in use)??"
ah i forgot ; the cable schema 1---4; 2---5

thank you all :)