[asterisk-users] Problem with TE212P

[Benito Camelas]

Hello.

I have a TE212 configured in E1 mode.

This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured):

cat /proc/zaptel/2
Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN

          25 TE2/0/1/1 Clear
          26 TE2/0/1/2 Clear
          27 TE2/0/1/3 Clear
          28 TE2/0/1/4 Clear
          29 TE2/0/1/5 Clear
          30 TE2/0/1/6 Clear
          31 TE2/0/1/7 Clear
          32 TE2/0/1/8 Clear
          33 TE2/0/1/9 Clear
          34 TE2/0/1/10 Clear
          35 TE2/0/1/11 Clear
          36 TE2/0/1/12 Clear
          37 TE2/0/1/13 Clear
          38 TE2/0/1/14 Clear
          39 TE2/0/1/15 Clear
          40 TE2/0/1/16 HDLCFCS
          41 TE2/0/1/17 Clear
          42 TE2/0/1/18 Clear
          43 TE2/0/1/19 Clear
          44 TE2/0/1/20 Clear
          45 TE2/0/1/21 Clear
          46 TE2/0/1/22 Clear
          47 TE2/0/1/23 Clear
          48 TE2/0/1/24 Clear
          49 TE2/0/1/25 Clear
          50 TE2/0/1/26 Clear
          51 TE2/0/1/27 Clear
          52 TE2/0/1/28 Clear
          53 TE2/0/1/29 Clear
          54 TE2/0/1/30 Clear
          55 TE2/0/1/31 Clear

cat /proc/zaptel/3
Span 3: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"

          56 TE2/0/2/1 Clear
          57 TE2/0/2/2 Clear
          58 TE2/0/2/3 Clear
          59 TE2/0/2/4 Clear
          60 TE2/0/2/5 Clear
          61 TE2/0/2/6 Clear
          62 TE2/0/2/7 Clear
          63 TE2/0/2/8 Clear
          64 TE2/0/2/9 Clear
          65 TE2/0/2/10 Clear
          66 TE2/0/2/11 Clear
          67 TE2/0/2/12 Clear
          68 TE2/0/2/13 Clear
          69 TE2/0/2/14 Clear
          70 TE2/0/2/15 Clear
          71 TE2/0/2/16 HDLCFCS
          72 TE2/0/2/17 Clear
          73 TE2/0/2/18 Clear
          74 TE2/0/2/19 Clear
          75 TE2/0/2/20 Clear
          76 TE2/0/2/21 Clear
          77 TE2/0/2/22 Clear
          78 TE2/0/2/23 Clear
          79 TE2/0/2/24 Clear
          80 TE2/0/2/25 Clear
          81 TE2/0/2/26 Clear
          82 TE2/0/2/27 Clear
          83 TE2/0/2/28 Clear
          84 TE2/0/2/29 Clear
          85 TE2/0/2/30 Clear
          86 TE2/0/2/31 Clear

Before I do load the modules the leds are ligthing.
But after a ztcfg -v the led of the second span is off.

First I do  insmod wct4xxp and after ztcfg -vv.
The zaptel.conf file is like this:
#
#zaptel.conf
#

fxsks=1-24

span=1,0,0,ccs,hdb3,crc4
span=2,0,0,ccs,hdb3,crc4

bchan=25-39,41-55
dchan=40

bchan=56-70,72-86
dchan=71

loadzone=nl
defaultzone=nl

(I have an TDM24P too, it works ok).

In this moment the led of the first span of the TE212P is in RED (if
no cable connected) or in GREEN (if a cable is conected), but the led
of the second span is off.

This is shown in a pri show span in the CLI (with no cable connected):

pri show span 2
 Primary D-channel: 40
Status: Provisioned, In Alarm, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3

*CLI> pri show span 3
Primary D-channel: 71
Status: Provisioned, Down, Active
Switchtype: EuroISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3

If anybody knows what'ś the problem I'll be very pleasent for your help.

Best Regards,

Benito