[asterisk-users] TE110P: Error ==> Asterisk died with code 1.

[Steve Totaro]

Jeronimo Romero wrote:
> Running Asterisk 1.2.9. I just installed a TE110P card and configured
> zaptel.conf & zapata.conf. The config files look right to me but I'm
> getting the following error when trying to start asterisk:
>
> Asterisk died with code 1.
> Automatically restarting Asterisk.
>
> Does anyone have any idea what is wrong with this configuration??
> Thanks in advance!!!
>
>
> Here's my config files:
>
> zaptel.conf
>
> span=1,1,0,esf,b8zs
> bchan=1-23
> dchan=24
> loadzone=us
> defaultzone=us
>
> Zapata.conf
>
> [channels]
> context=from-pstn
> switchtype=national
> signalling=pri_cpe
> rxwink=300
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> echocancel=yes
> rxgain=0.0
> txgain=0.0
> immediate=yes
> group=0
> signalling=pri_cpe
> context = from-pstn
> channel =>1-23
>
> ======================
> Jeronimo Romero
> EUS Networks
> Email: jromero at euscorp.com
> Cell: 917-332-7238
> Office: 212-624-5943
> Web: www.euscorp.com
> ======================
>
>   
tail /var/log/asterisk/full will give you good insight.

Thanks,
Steve