[asterisk-users] H323-to-SIP proxy

[Octavarium]

What about the SIP leg?


----- Mensaje Original -----
De: "Michelle Dupuis" <support at ocg.ca>
Para: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Enviados: martes 27 de febrero de 2007 16h'08 (GMT-0300) America/Argentina/Buenos_Aires
Asunto: RE: [asterisk-users] H323-to-SIP proxy

T.38 won't work over the H.323 leg of your call (even with Open H.323),
chan_h323 won't support it.

MD 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Octavarium
Sent: Tuesday, February 27, 2007 12:51 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] H323-to-SIP proxy

I need to receive a FAX call from a SIP device into my Asterisk box, then
send that FAX call to an H323 gateway and bridge the call, so Asterisk will
be acting as a Converter.
SIP device is a Grandstream HT496 so i can configure FAX Pass-through, but
the H323 gateway only supports T.38

BTW, i am able to make voice calls from SIP device to H323 gateway, the
problem is with FAX How can i do this?

Best Regards,


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users