[asterisk-users] Sangoma A101 install problem

[David Ruggles]

I just got a brand new A101 and am trying to install it in my test Asterisk
box.
The install went without a hitch. I followed the directions on the Sangoma
Wiki:
Wanpipe Asterisk Install
http://sangoma.editme.com/wanpipe-linux-asterisk-install
Wanpipe for Asterisk Configuration
http://sangoma.editme.com/wanpipe-asterisk-configure

It went perfect, no problems and Asterisk came up fine. I downed the box and
moved it from my office to the computer room where I could hook it up to a
test T1. I booted the box up and it looked like Zaptel wasn't installed. I
went to the zaptel source directory and did a "make clean", "make install"
no errors, but now ztcfg -vvv shows this:

Zaptel Version: 1.4.0
Echo Canceller: MG2
Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: E & M (Default) (Slaves: 01)
Channel 02: E & M (Default) (Slaves: 02)
Channel 03: E & M (Default) (Slaves: 03)
Channel 04: E & M (Default) (Slaves: 04)
Channel 05: E & M (Default) (Slaves: 05)
Channel 06: E & M (Default) (Slaves: 06)
Channel 07: E & M (Default) (Slaves: 07)
Channel 08: E & M (Default) (Slaves: 08)
Channel 09: E & M (Default) (Slaves: 09)
Channel 10: E & M (Default) (Slaves: 10)
Channel 11: E & M (Default) (Slaves: 11)
Channel 12: E & M (Default) (Slaves: 12)
Channel 13: E & M (Default) (Slaves: 13)
Channel 14: E & M (Default) (Slaves: 14)
Channel 15: E & M (Default) (Slaves: 15)
Channel 16: E & M (Default) (Slaves: 16)
Channel 17: E & M (Default) (Slaves: 17)
Channel 18: E & M (Default) (Slaves: 18)
Channel 19: E & M (Default) (Slaves: 19)
Channel 20: E & M (Default) (Slaves: 20)
Channel 21: E & M (Default) (Slaves: 21)
Channel 22: E & M (Default) (Slaves: 22)
Channel 23: E & M (Default) (Slaves: 23)
Channel 24: E & M (Default) (Slaves: 24)
Channel 25: FXS Kewlstart (Default) (Slaves: 25)

25 channels configured.

ZT_SPANCONFIG failed on span 1: Invalid argument (22)

Any ideas what went wrong?

Thanks,

David Ruggles
CCNA MCSE (NT) CNA A+
Network Engineer	Safe Data, Inc.
(910) 285-7200	david at safedatausa.com