[asterisk-users] Mini-ITX board + FXO PCI card?

[Vincent Delporte]

At 10:09 11/02/2007 -0500, Gordon Henderson wrote:
>On the CN1000 boards I'm using, the PCI slot seems tobe locked to IRQ10. 
>The on-board USB hardware also seems to be wired to IRQ 10 :-) Using the 
>BIOS to "reserve" IRQ 10 caused the on-board USB hardware to  move to IRQ5 
>on the old VIA 533MHz boards I use for R&D, but not on the  new CN1000 
>boards. You'll need to experiment with this on the EX board...

Thanks a lot for the feedback. I'll probably get an ML8000, so hopefully 
the PCI board can have its own IRQ.

>I've not tried it (I boot them off a flash IDE device I create on a 
>host  system), but can't you just temporarily plug in a CD drive to do the 
>install (onto a local IDE/SATA drive) then unplug it & put the lid back  on?

Right, I hadn't thought of this. Guess that solves the issue then. Looks 
like the only site that sells the Travla 138 is www.caseoutlet.com .

Thanks.