[asterisk-users] Guide to better performance using * ?

[Melcon Moraes]

What about the cat /proc/interrupts ?


 -----Original Message-----
From:   "Tim Connolly" <tconnolly at theplanet.com>
To:     "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
Cc:     
Sent:  Wed, 14 Feb 2007 17:17:34 -0600
Delivered:  Wed,  14 Feb 2007 21:14:36 
Subject:[asterisk-users] Guide to better performance using * ?

It's a SCSI Raid, so not much:

hdparm /dev/sda

/dev/sda:
 HDIO_GET_MULTCOUNT failed: Invalid argument
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 8908/255/63, sectors = 73274490880, start = 0 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kevin
Withnall
Sent: Wednesday, February 14, 2007 3:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Guide to better performance using * ?

We had a similar issue with a 'new' server here. We had a trixbox
install and the kernel didn't support the particular type of
motherboard/drive combination and the disk was not in DMA mode. There
was nothing we could do to get it to work and eventually put in an older
motherboard. Since then, its been working beautifully.

Run a hdparm /dev/hda (or whatever your disk is) and make sure its in
dma mode.

--
Kevin Withnall
ILB Computing
PH: 02 4227 0001 Mobile: 0412 453 846 FAX: 02 4253 0001
http://www.ilb.com.au/ http://kevin.withnall.com/
 
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Stephen 
> Bosch
> Sent: Thursday, 15 February 2007 5:54 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Guide to better performance using * ?
> 
> Tim Connolly wrote:
> >     Can someone point me in the right direction to find
> documentation on
> > best practices when setting up a new Asterisk server? I'm
> using RHES4
> > and Dell 1750 with TE412P. My current problems are frequent
> crashes and
> > choppy audio so I think I can easily tweak these out of the picture.
> 
> Ah! A Dell!
> 
> What does your 'cat /proc/interrupts' say?
> 
> -Stephen-
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

E-mail classificado pelo Identificador de Spam Inteligente Terra.
Para alterar a categoria classificada, visite
http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1171495417.742975.2209.tulear.hst.terra.com.br,5600,Des15,Des15


 --Original Message Ends--

-- 
Melcon Moraes <melcon.moraes at terra.com.br>