[asterisk-users] genzaptool from "xorcom"

[younss azzayani]

Thank You Cohen

What card do you have?
*****************
Digium TE110P & TDM400P, think the problem is with TE110P (configured
as span 2) because i remark that the dchannel=20
*********************
What is th output of: cat /proc/zaptel/*
*************************
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"

           1 WCTDM/0/0 FXSKS
           2 WCTDM/0/1 FXSKS
           3 WCTDM/0/2 FXSKS
           4 WCTDM/0/3 FXSKS
Span 2: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/CCS

           5 WCT1/0/1 Clear
           6 WCT1/0/2 Clear
           7 WCT1/0/3 Clear
           8 WCT1/0/4 Clear
           9 WCT1/0/5 Clear
          10 WCT1/0/6 Clear
          11 WCT1/0/7 Clear
          12 WCT1/0/8 Clear
          13 WCT1/0/9 Clear
          14 WCT1/0/10 Clear
          15 WCT1/0/11 Clear
          16 WCT1/0/12 Clear
          17 WCT1/0/13 Clear
          18 WCT1/0/14 Clear
          19 WCT1/0/15 Clear
         13 WCT1/0/9 Clear
          14 WCT1/0/10 Clear
          15 WCT1/0/11 Clear
          16 WCT1/0/12 Clear
          17 WCT1/0/13 Clear
          18 WCT1/0/14 Clear
          19 WCT1/0/15 Clear
          20 WCT1/0/16
          21 WCT1/0/17
          22 WCT1/0/18
          23 WCT1/0/19
          24 WCT1/0/20
          25 WCT1/0/21
          26 WCT1/0/22
          27 WCT1/0/23
          28 WCT1/0/24
          29 WCT1/0/25
          30 WCT1/0/26
          31 WCT1/0/27
          32 WCT1/0/28
          33 WCT1/0/29
          34 WCT1/0/30
          35 WCT1/0/31
********************************

What is the generated /etc/zaptel.conf ?
******************************
# Autogenerated by ./genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order


# Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
fxsks=1
fxsks=2
fxsks=3
fxsks=4

# Span 2: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" HDB3/CCS
span=2,1,1,ccs,hdb3
bchan=5-19,21-35
dchan=20

# Global data

loadzone        = us
defaultzone     = us

*****************************