[asterisk-users] The High Performance Echo Canceller (HPEC)

[Nic Bellamy]

shadowym wrote:
> Interesting,
>
> Is this just a more advanced software echo canceller or software with
> hardware hooks or software with hardware assisted processing?
>   
A more advanced software canceller (there's no magical thing that makes 
"hardware" echo cancellers better, it's still software, but it's running 
on a DSP so it has more grunt available to it).

It's licensed from Adaptive Digital Technologies - G.168 compliant, and 
supports up to 1024 taps (128ms) of tail coverage. Comes as a binary 
blob, but such is life.
> How would it compare to a true hardware echo canceller like the one Sangoma
> uses.  Besides the extra CPU cycles required.
>   
Quite comparable - not sure if Octasic (as used by Sangoma and the 
latest Digium cards) or ADT would win in a shootout, but they're both in 
the same quality class.

The main issue is going to be CPU usage - getting this going at 1024 
taps on a full T1/E1 span would likely require two fast CPUs with the 
interrupts distributed evenly between them... and even then, *shrug*

Cheers,
    Nic.
> -----Original Message-----
> From: Nic Bellamy [mailto:nicb-lists at vadacom.co.nz] 
> Sent: Tuesday, February 13, 2007 12:41 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] The High Performance Echo Canceller (HPEC)
>
> Larry Shields wrote:
>   
>> I recently read about the following new technologies from Digium.  Has 
>> anyone tried the new HPEC or knows when it will be available?
>>     
> It's out now, and I've tried it - the difference between HPEC and MG2 from
> trunk is stunning - in situations with bad echo where MG2 can take ten or
> more seconds to converge to a reasonable degree, HPEC does it in perhaps
> 300ms - converging on my intake of breath before I say "hello", and
> absolutely no echo after that unless I purposefully go out of my way to
> screw it up (whistling/blowing into the handpiece for instance - even then,
> the malfunction is minimal).
>
> You can now buy it from the Digium website (US$10 per channel), or if you
> have an in-warranty Digium card, email through the serial numbers to Digium
> support and they'll give you a key (this is what I did).
>
> You'll need Zaptel 1.2.13 to make it go.
>
> It does take quite a bit of CPU though - perhaps 70% more compared to
> MG2-trunk for the same number of taps from my rough measurements.
>
> Cheers,
>     Nic.
>
> --
> Nic Bellamy,
> Head Of Engineering, Vadacom Ltd - http://www.vadacom.co.nz/
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>   


-- 
Nic Bellamy,
Head Of Engineering, Vadacom Ltd - http://www.vadacom.co.nz/