[asterisk-users] TDM2400 and 3.3v pci

[Paradise Dove]

my card has just fxo modules and is put in a 3.3v slot.
when running modprobe wctdm24xxp
it waits for ever and dmesg shows "Resetting the modules...".

what could be the problem?

when i put this card in another system with 5v slot it works fine.

On 2/12/07, William Moore < nyphbl8d at gmail.com> wrote:
>
> On 2/11/07, Paradise Dove < pardove at gmail.com> wrote:
> > does TDM2400 work on 3.3v pci slot?
>
> Yes, all of Digium's analog cards are dual voltage and can work with
> either 3.3V or 5V slots.  You just need to make sure you have an extra
> molex connector if you're going to be using FXS modules on the card.
>
> William
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070212/5e466b71/attachment.htm