[asterisk-users] TDM400 with 1 FXO

[Yuan LIU]

>From: "Klaverstyn, David C" <David.Klaverstyn at intergraph.com>
>Date: Fri, 9 Feb 2007 13:30:02 +1100
>
>Yes, I have also since put that in and I get the error:
>Feb  8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring
>signalling

This is not quite an error.  Did you do a reload or a fresh start?  I get 
this warning every time I reload.  Have you tried 'show modules like chan_' 
or 'show channeltypes' and confirm that chan_zap is not loaded after putting 
in signalling=fxs_ks (not fxsks like in zaptel.conf)?

If anything, test if wctdm is indeed configured correctly using zttool 
(under your compiled source tree).

Yuan Liu

>And if I put in rxwink I get this error:
>Feb  8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring
>rxwink
>
>It's all very strange.
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Leo Ann
>Boon
>Sent: Friday, 9 February 2007 12:20 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [asterisk-users] TDM400 with 1 FXO
>
>Klaverstyn, David C wrote:
> > Hi,
> >
> > Yes it should, I have changed it back and is still causing the same
> > problems.
> >
>Did you also missed out the following line in zapata.conf?
>signalling=fxs_ks
>
>Leo