[asterisk-users] TDM400 with 1 FXO

[Klaverstyn, David C]

When I made a change I was always doing a ztcfg -vv and then an asterisk
reload.

I have rebooted the server now but still have the same problem.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Leo Ann
Boon
Sent: Friday, 9 February 2007 2:32 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] TDM400 with 1 FXO

Klaverstyn, David C wrote:
> My original post does have the contents of the file exactly.
>
> In my /etc/asterisk/zapata.conf file I have 
> [trunkgroups]
>
> [channels]
> context=from-pstn
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
>
>   
You need to insert signalling before the channel statement:
signalling=fxs_ks
> channel => 1
>
>   
>> Yes, I have also since put that in and I get the error:
>> Feb  8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring
>> signalling
>>     
This warning happens when you change the signalling in zapata.conf 
without restarting asterisk. I suspect you did a zap reload on the
console.

I'd suggest you restart both zaptel and asterisk to keep everything in
sync.

Leo
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users