[asterisk-users] TDM400 with 1 FXO

[Klaverstyn, David C]

Hi,  I stuffed Up,

Here is my correct contents


; Configuration file
 
[trunkgroups]
 
[channels]
 
language=en
context=from-pstn
signalling=fxs_ks
rxwink=300           ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
 
busydetect=yes
busycount=6
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
 
channel => 1


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Yuan LIU
Sent: Friday, 9 February 2007 2:29 PM
To: asterisk-users at lists.digium.com
Subject: RE: [asterisk-users] TDM400 with 1 FXO

>From: "Klaverstyn, David C" <David.Klaverstyn at intergraph.com>
>Date: Fri, 9 Feb 2007 15:12:49 +1100
>
>My original post does have the contents of the file exactly.

You haven't defined channel signaling in zapata.conf.  Need something
like
signalling = fxs_ks
according to your zaptel.conf.

Yuan Liu

>In my /etc/asterisk/zapata.conf file I have
>[trunkgroups]
>
>[channels]
>context=from-pstn
>usecallerid=yes
>hidecallerid=no
>callwaiting=yes
>usecallingpres=yes
>callwaitingcallerid=yes
>threewaycalling=yes
>transfer=yes
>canpark=yes
>cancallforward=yes
>callreturn=yes
>echocancel=yes
>echocancelwhenbridged=yes
>rxgain=0.0
>txgain=0.0
>group=1
>callgroup=1
>pickupgroup=1
>immediate=no
>
>channel => 1
>
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Leo Ann
>Boon
>Sent: Friday, 9 February 2007 12:44 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [asterisk-users] TDM400 with 1 FXO
>
>Klaverstyn, David C wrote:
> > Yes, I have also since put that in and I get the error:
> > Feb  8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring
> > signalling
> >
> > And if I put in rxwink I get this error:
> > Feb  8 19:24:30 WARNING[4022]: chan_zap.c:10874 setup_zap: Ignoring
> > rxwink
> >
> > It's all very strange.
> >
>please post your complete zapata.conf - I think there's a preceding
line
>
>that's confusing the parser.
>
>Leo
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users