[asterisk-users] Can't get asterisk to compile chan_zap(was"NewIssue")

[David Ruggles]

that I have! :)

Have a single X100P in the system and ztcfg configures the board no problem.
zttool confirms the board is there and shows RED when the phone line is
removed and OK when the phone line is plugged in.

Thanks,
 
David Ruggles
CCNA MCSE (NT) CNA A+
Network Engineer  Safe Data, Inc.
(910) 285-7200    david at safedatausa.com
 
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Yuan LIU
Sent: Wednesday, February 07, 2007 2:02 PM
To: asterisk-users at lists.digium.com
Subject: RE: [asterisk-users] Can't get asterisk to compile
chan_zap(was"NewIssue")


From:  "David Ruggles" <david at safedatausa.com>
Date:  Wed, 7 Feb 2007 12:15:37 -0500
>I captured the output of ./configure and found the following lines:
>
><lines snipped>
>checking zaptel/tonezone.h usability... yes
>checking zaptel/tonezone.h presence... yes
>checking for zaptel/tonezone.h... yes
><lines snipped>
>checking for ZT_TONE_DTMF_BASE in zaptel.h... Yes
><lines snipped>
>
>So it seems to be finding the /usr/include/zaptel directory and files fine.
>Is there anything else I can do that might offer information that could
help
>track this problem down?

At least one version of Asterisk (1.4?) requires correct kernel driver
configuration before compilation.  Have you done ztconfig and stuff?

Yuan Liu

>Thanks,
>
>David Ruggles
>CCNA MCSE (NT) CNA A+
>Network Engineer Safe Data, Inc.
>(910) 285-7200 david at safedatausa.com