[asterisk-users] Billing pulses

[George Camilleri]

Hi

"Billing Pulses" only apply to analogue lines. You need special hardware in 
the PBX interface to detect them and pass them on to the Billing software. 
To my knowlege there is no Asterisk compatible hardware that does this.

George
----- Original Message ----- 
From: "Stefano Corsi" <scorsi at floo.it>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Wednesday, February 07, 2007 4:04 PM
Subject: [asterisk-users] Billing pulses


> Hello,
>
> I've discovered that in Italy ISDN lines can be programmed to generate a 
> "billing pulse" every n seconds (it dipends from the pricebook). The pulse 
> has these figures:
>
> frequency 
> .................................................................... 12 
> kHz ± 1%
>
> level 
> .......................................................................... 
> 200 mVrms on 200
>
> distortion................................................................... 
> < 5%
> pulse duration 
> .............................................................125 ± 25 ms
> pause duration 
> ................................................................> 180 ms
> period 
> .......................................................................> 
> 300 ms
>
> Does someone know if these values can be used somehow to get an accurate 
> billing using asterisk with these lines? Could be a matter of 
> configuration or programming?
>
> Thanks
> Stefano
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.432 / Virus Database: 268.17.29/673 - Release Date: 2/6/2007 
> 5:52 PM
>
>