[asterisk-users] New user question (X100P)

[info at unifycall.com]

Try to execute the command:  lspci
   
  if the card is ok, you will found some informations such as:
   
  01:00.0 Communication controller: Motorola: Unknown device 5608

  or 
   
  something likes tigerjet
   
  If you can't find them, I think you have to unplug the card and insert it to another pci slot.
  

Andrew D Kirch <trelane at trelane.net> wrote:
  David Ruggles wrote:
> I'm trying to set up a simple test box to start developing with Asterisk.
> 
> I've got a Dell GX150 with two X100P cards. I've downloaded, printed out and
> read through most of TFOT. I've also done a lot of Internet searching.
> 
> I'm getting this error:
> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
> 
> Based on the searching I've done, it seems like the problem must be shared
> IRQ issues. I've gone in the BIOS and disabled everything I can but I can't
> stop the sharing completely. One X100P is shared with the built-in video and
> the other X100P is shared with a serial controller. (I disabled both serial
> ports)
> 
> My question is this: (in three parts)
> 
> 1) Are my research and assumptions accurate? Does this seem to be an IRQ
> issue?
> 2) If I have to build another system to prevent the IRQ problem, can anyone
> recommend hardware (just for a simple test box right now)
> 3) Is it worth keeping the X100Ps or should I get a TDM400P like used in
> TFOT, or something else? (again just for testing)
> 
> If there are other things I should check first please let me know!!
> 
> TIA!!!!!
> 
> Thanks,
> 
> David Ruggles
> CCNA MCSE (NT) CNA A+
> Network Engineer Safe Data, Inc.
> (910) 285-7200 david at safedatausa.com
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
The X100P is going to leave you fairly unsatisfied with your Asterisk 
experience. It lacks an on-card timing interface, and real X100P's 
haven't been made in quite awhile (several years). You may or may not 
get caller ID, you may or may not get two way audio. I know it's a bit 
more but you're better off with the TDM. Good luck!

-- 
Andrew D Kirch | Abusive Hosts Blocking List | www.ahbl.org
Security Admin | Summit Open Source Development Group | www.sosdg.org
Key fingerprint = 4106 3338 1F17 1E6F 8FB2 8DFA 1331 7E25 C406 C8D2
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070205/db9bdcff/attachment.htm