CallerID to FXS (RE: [asterisk-users] SendText() question)

[Leo Ann Boon]

Yuan LIU wrote:
>> From: Leo Ann Boon <leo at datvoiz.com>
>>
>> Yuan LIU wrote:
>>> Related to callerid: I can't get text ID to work in an analog phone 
>>> on FXS.  I tried the above format, it simply displays the entire 
>>> string in both numeric and text field (i.e., displays the same 
>>> string twice).  Tried a few other ways, got varied results (some 
>>> resulting in "Unknown").  Nothing can get the analog phone to 
>>> display name in text field and number in numeric field.
>>>
>>> I'm using TDM400, phone is 27935GE3-B, Zaptel 1.2.10, Asterisk 
>>> 1.2.12.  On a "normal" line, the phone displays name on one line and 
>>> number on another.
>>>
>>> Anyone sending caller ID to FXS?
>>>
>> Works fine with my GE29393GE2-A. I think you need the right syntax, 
>> in your .conf it should look like
>> callerid="John Doe" <1234>
>>
>> Note the quotes around the name.
>>
>> Leo
>
> Ain't working.  27935GE3-B simply says "unknown" or displays a blank 
> if the string contains quote.  I know that I can configure a softphone 
> (e.g., Xten) to display correctly, because it has a user id and a 
> display name.  Anything similar in Asterisk?
Can post your zapata.conf?

You need to ensure Asterisk is sending the FSK signal at the right time.

This is from my zapata.conf:

signalling=fxo_ks
sendcalleridafter=2
usecallerid=yes
cidsignalling=bell
cidstart=ring

Leo