[asterisk-users] Sangoma card dying after 1hour

[Asterisk]

Hi Jon,

Did you find any solution for your problem?

-- Alex


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jon Schopzinsky
Sent: Friday, January 26, 2007 3:21 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [asterisk-users] Sangoma card dying after 1hour

Asterisk is version 1.2.14, zaptel 1.2.12, libpri is whatever version was with zaptel 1.2.12 :)

Jon

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Davies
Sent: 26. januar 2007 12:03
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Sangoma card dying after 1hour

Which asterisk versions etc etc?

On 1/26/07, Jon Schøpzinsky <jos at detele.dk> wrote:
> I am running the newest version, from the sangoma wiki.
>
> Jon
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Davies
> Sent: 26. januar 2007 10:56
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Sangoma card dying after 1hour
>
> On 1/26/07, Jon Schøpzinsky <jos at detele.dk> wrote:
> >
> > Hello List
> >
> > I am having a rather big problem with a sangoma A104 card, I just installed
> > to replace a Digium TE410 card, that was acting up.
> >
> > But now we have a problem with the sangoma card. It runs great after being
> > started, and calls proceed as normal, but after about 1 hour, it stops being
> > able to make and receive calls.
> >
> > If I run wanpipemon debug,  can see that the card still receives packets
> > from the ISDN, but when I make a call, I cant see it in wanpipemon, and
> > asterisk just responds with a:
> >
> > NOTICE[17240] app_dial.c: Unable to create channel of type 'Zap' (cause 34 -
> > Circuit/channel congestion)
> >
> > I am pretty shure that this is a configuration issue, but are there anything
> > I need to be aware of when moving from a Digium card to a sangoma card?
>
> Which wanpipe version? Anything lower than 2.3.4-4 should be upgraded
> as there are some resource leak fixes in that version.
>
> Regards,
> Steve
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users