[asterisk-users] Definity G3R and MWI

[Henk Dick]

Doug,

Have you checked the feature access code that is defined in the 
definity.  That is the code that needs to be dialed.  I always checked 
the codes from a definity phone to make sure that I was using the right 
codes.

Henk

Doug Lytle schreef:
> Henk Dick wrot
>   
>> I have been playing with this some time ago.  We used the so called mode 
>> code integration.  This worked fine.  It works simular as described for 
>> other Avaya Product.
>>
>> http://www.voip-info.org/wiki/view/Avaya+or+Lucent+Magix+Voicemail+Integration
>>   
>>     
>
> Yes, I saw the page.  The Definity wouldn't accept *53XXXX for on, and 
> #*53XXXX for off. 
>
> For a test, I was using extension 5574, so I did a Dial(ZAP/g1/*535574) 
> from a Asterisk console with no results on the test phone.  This system 
> is attached via a PRI.
>
> Thanks!
>
> Doug
>
>