[asterisk-users] ISDN BRI support with HFC-PCI cards?

[Tzafrir Cohen]

On Thu, Dec 27, 2007 at 04:00:49PM +0100, Jaap Winius wrote:
> Quoting Tzafrir Cohen <tzafrir.cohen at xorcom.com>:
> 
> >> > cat /proc/zaptel/*
> >>
> >> Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 DEACTIVATED   
> >> (F4)" AMI/CCS
> >>
> >>             1 ZTHFC1/0/1 Clear (In use)
> >>             2 ZTHFC1/0/2 Clear (In use)
> >>             3 ZTHFC1/0/3 HDLCFCS (In use)
> >> Span 2: ZTHFC2 "HFC-S PCI A ISDN card 1 [TE] layer 1 ACTIVATED (F7)" AMI/CCS
> >>
> >>             4 ZTHFC2/0/1 Clear (In use)
> >>             5 ZTHFC2/0/2 Clear (In use)
> >>             6 ZTHFC2/0/3 HDLCFCS (In use)
> >
> > Looks like it's already configured and used by Asterisk.
> 
> Indeed. It would appear that Asterisk now recognizes these cards. Of  
> course, I now have another set of problems, but I'll ask about those  
> in a new thread.
> 
> > However, I believe that the ports are disconnected, right?
> 
> Physically? One had a cable in it, the other one didn't.

Sorry, and it is clearly stated above. I have just misread it.

So basically dial to Zap/g0/NUMBER and it should dial it to  and it should 
dial it to your provider.

Using pridialplan=unknown in zapata.conf may also help.

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir