[asterisk-users] ISDN BRI support with HFC-PCI cards?

[Tzafrir Cohen]

On Thu, Dec 27, 2007 at 12:07:50AM +0100, Jaap Winius wrote:
> Quoting Tzafrir Cohen <tzafrir.cohen at xorcom.com>:
> 
> >> However, after installing the zaptel package, I get these
> >> errors:
> >>
> >>     # genzaptelconf -sd
> >>     Stopping Asterisk PBX: asterisk.
> >>     cat: /tmp/tmp.uiMna12463/span_termtype: No such file or directory
> >>     cat: /tmp/tmp.uiMna12463/span_termtype: No such file or directory
> >>     Starting Asterisk PBX: asterisk.
> >
> > cat /proc/zaptel/*
> 
> Here's the output from that command:
> 
> ==================
> 
> Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 DEACTIVATED (F4)" AMI/CCS
> 
>             1 ZTHFC1/0/1 Clear (In use)
>             2 ZTHFC1/0/2 Clear (In use)
>             3 ZTHFC1/0/3 HDLCFCS (In use)
> Span 2: ZTHFC2 "HFC-S PCI A ISDN card 1 [TE] layer 1 ACTIVATED (F7)" AMI/CCS
> 
>             4 ZTHFC2/0/1 Clear (In use)
>             5 ZTHFC2/0/2 Clear (In use)
>             6 ZTHFC2/0/3 HDLCFCS (In use)

Looks like it's already configured and used by Asterisk.

However, I believe that the ports are disconnected, right?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir