[asterisk-users] Two lines for outgoing calls

[Steve Totaro]

Dominik Zalewski wrote:
> Dear All,
>
> I'm using Asterisk 1.4.16.2 with Zaptel 1.4.7 on Debian with kernel
> 2.6.18. 
>
> I have two analog lines Zap/1 and Zap/2 as group 1 in zapata.conf. I'm
> using below context for dialing out.
>
> [outbound-local]
> exten => _9XXX,1,Dial(Zap/g1/${EXTEN:1},30,tTr)
> exten => _9XXXXX,1,Dial(Zap/g1/${EXTEN:1},30,tTr)
> exten => _9ZXXXXXX,1,Dial(Zap/g1/${EXTEN:1},30,tTr)
> exten => _9ZXXXXXXX,1,Dial(Zap/g1/${EXTEN:1},30,tTr)
> exten => _90900XXXXX,1,Dial(Zap/g1/${EXTEN:1},30m,tTr)
>
> When Zap/1 is busy and I try to call, it will use Zap/2 which is fine
> but there is something wrong cause I hear one ring and then a weird
> sound like a noise or something and then hangup. I have to reload zaptel
> modules and then everything works fine for a while.
>
>    -- Executing [9150 at from-internal:1] Dial("SIP/200-08221590",
> "Zap/g1/150|30|tTr") in new stack
>     -- Called g1/150
>     -- Zap/2-1 answered SIP/200-08221590
>     -- Hungup 'Zap/2-1'
>
> I even thought that second fxo module is broken so I changed it. No
> results.
>
> Any ideas?
>
> Thank you in advance,
>
> Dominik 
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>   
Not sure why you would have intermittent problems like that.  Is this a 
Digium card? 

I once had a four port FXO Digium card and thought that I had a bad FXO 
module but it turned out that it was actually the slot on the card 
itself.  The issue I was experiencing was large amounts of static so 
that you could not hear anything.

Maybe you can find something helpful in /var/log/messages that 
corresponds with the issue.

Anyways, I would contact the manufacturer and see what they can do for you.

Thanks,
Steve Totaro