[asterisk-users] sip.conf for internetcalls.com

[Justin Case]

What comes up in the Asterisk CLI ? Set debug and verbosity to 9 and see
what comes up. Also it can be a NAT issue ? Have Asterisk register every 3-4
minutes.

On Dec 24, 2007 4:00 PM, Jaap Winius <jwinius at umrk.to> wrote:

> Hi all,
>
> Perhaps someone here could help me with this. I'm new to Asterisk, but
> have already met with some success at getting my first system to work
> with two different VoIP (SIP) providers: XS4ALL and InternetCalls.com.
> The config
> for the former works fine, but my InternetCalls.com config works only
> intermittently for incoming calls. It currently looks like this:
>
> [general]
> port=5060
> bindaddr=0.0.0.0
> srvlookup=yes
> register => <usr-name>:<passwd>@sip.internetcalls.com/inetcalls-in
>
> [inetcalls]
> type=friend
> context=inetcalls-in
> nat=yes
> username=<usr-name>
> fromuser=<usr-name>
> secret=<passwd>
> host=sip.internetcalls.com
> canreinvite=no
> qualify=yes
> dtmfmode=inband
> insecure=invite
> disallow=all
> allow=ulaw
> allow=alaw
>
> When I dial in from outside and it doesn't work, all I get is a busy
> signal and no further clues as to what might be wrong. Any ideas?
>
> Thanks very much,
>
> Jaap
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071224/20c1d9f1/attachment.htm