[asterisk-users] OpenVox A800P01 and ZT_CHANCONFIG failed

[nik600]

On 12/23/07, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
> On Sun, Dec 23, 2007 at 07:05:37PM +0100, nik600 wrote:
> > Hi
> >
> > i've got an openvox a800p01 with 1 FXO and 4 FSX
> >
> > i've done the following:
> > - downloaded zaptel-1.4.7.1
> > > >> - downloaded the file opvxa1200.c
> > > >> - copied in zaptel-1.4.7.1/
> > > >> - edited makefile adding opvxa1200 in the modules and the voice
> > > >> opvxa1200.o : zaptel.h wctdm.h
> > > >> - edited zaptel.sysconfig adding
> > MODULES="$MODULES opvxa1200" # OPENVOXA1200P
> >
> > after that ive done:
> > make clean", "make", "make install
> > finally, if i do:
> > modprobe opvxa1200
>
> dmesg | tail


Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.4.7.1
Zaptel Echo Canceller: MG2


>
> >
> > if i launch ./zapconf
>
> cat /proc/zaptel/*

root at datatwo:~# cat /proc/zaptel/
cat: /proc/zaptel/: Is a directory
root at datatwo:~# ls -la /proc/zaptel/
total 0
dr-xr-xr-x  2 root root 0 2007-12-24 14:37 ./
dr-xr-xr-x 76 root root 0 2007-12-23 21:18 ../


It seems that the module doesn't recognize the card!... but the card
is recognized by lspci...
-- 
/*************/
nik600
https://sourceforge.net/projects/ccmanager
https://sourceforge.net/projects/reportmaker
https://sourceforge.net/projects/nikstresser