[asterisk-users] OpenVox A800P01 and ZT_CHANCONFIG failed

[nik600]

Hi

i've got an openvox a800p01 with 1 FXO and 4 FSX

i've done the following:
- downloaded zaptel-1.4.7.1
> >> - downloaded the file opvxa1200.c
> >> - copied in zaptel-1.4.7.1/
> >> - edited makefile adding opvxa1200 in the modules and the voice
> >> opvxa1200.o : zaptel.h wctdm.h
> >> - edited zaptel.sysconfig adding
MODULES="$MODULES opvxa1200" # OPENVOXA1200P

after that ive done:
make clean", "make", "make install
finally, if i do:
modprobe opvxa1200

if i launch ./zapconf

the file /etc/zaptel.conf still remains empty, if i force editing the
file adding:


> >> fxsks=1
> >> fxoks=2
> >> fxoks=3
> >> fxoks=4
> >> fxoks=5
> >>
> >> loadzone        = it
> >> defaultzone     = it

and do a:

ztcfg -vvvv

i get:

Zaptel Version: 1.4.7.1
> >> Echo Canceller: MG2
> >> Configuration
> >> ======================
> >>
> >>
> >> Channel map:
> >>
> >> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> >> Channel 02: FXO Kewlstart (Default) (Slaves: 02)
> >> Channel 03: FXO Kewlstart (Default) (Slaves: 03)
> >> Channel 04: FXO Kewlstart (Default) (Slaves: 04)
> >> Channel 05: FXO Kewlstart (Default) (Slaves: 05)
> >>
> >> 5 channels to configure.
> >>
> >> ZT_CHANCONFIG failed on channel 1: No such device or address (6)
> >>

Can you help me to guess the problem?

thanks
-- 
/*************/
nik600
https://sourceforge.net/projects/ccmanager
https://sourceforge.net/projects/reportmaker
https://sourceforge.net/projects/nikstresser