[asterisk-users] 7970 CTLFile.tlv?

[Jason Parker]

You don't need the .tlv file.  It's optional, and will be skipped if it cannot
be found.  Your problem is elsewhere.  I've found that the 7970s are very
finicky.  I've never had luck with the SEP<MAC>.cnf.xml - only
XmlDefault.cnf.xml (case may vary - check your tftp logs)

Matthew Rubenstein wrote:
> 	I've got a Cisco 7970 that's not completing its network registration to
> Asterisk. The "Registering" message stays on the screen (with the moving
> time wheel). After a few minutes, the onscreen message flashes "Updating
> CTL" then "Loading...", then the status messages update with:
> 
> No valid CAPF server
> File Not Found: CTLFile.tlv
> No CTL installed
> SEP<MAC>.cnf.xml (where <MAC> is the phone's MAC addr minus :s)
> 
> before repeating the cycle (forever).
> 
> 	Where can I get a CTLFile.tlv , or remove the requirement for it? Or is
> there another way to fix this problem? TIA.
> 
> Asterisk v1.2.9.1-BRIstuffed-0.3.0-PRE-1q
> SCCP firmware
> Load File: TERM70.7-0-1-0s
> App Load ID: Jar70.2-9-0-117.sbn
> JVM Load ID: CVM70.2-0-0-112.sbn
> OS Load ID: cnu70.2-7-4-134.sbn
> Boot Load ID: 7970_64060118.bin


-- 
Jason Parker
Digium