[asterisk-users] OpenVox B800P and asterisk 1.4/ mISDN-1_1_7

[nik600]

Hi
i've installed this software:

******************** SOFTWARE
mISDN-1_1_7
mISDNuser-1_1_7
Asterisk-1.4.15
******************** SOFTWARE

misdn is correctly loaded by misdn-inist start

Here there is the misdn.conf (copied from an existing and working
installation with Asterisk 1.2.x and one BN8S0)


******************** MISDN.CONF
[general]
misdn_init=/etc/misdn-init.conf
debug=0
bridging=no

stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
jitterbuffer=4000
jitterbuffer_upper_threshold=0
context=misdn
language=en
musicclass=maracaibo
senddtmf=yes
far_alerting=no
allowed_bearers=all
nationalprefix=0
internationalprefix=00
rxgain=0
txgain=0
te_choose_channel=no
pmp_l1_check=yes
need_more_infos=no
method=standard
dialplan=0
localdialplan=0
cpndialplan=0
early_bconnect=yes
incoming_early_audio=no
presentation=-1
screen=-1
echocancelwhenbridged=no
jitterbuffer=4000
jitterbuffer_upper_threshold=0

hdlc=no

[TEports]
ports=1,2,3,4,5,6,7,8
context=from-pstn
msns=*

******************** MISDN.CONF

When i start asterisk i get tihis warning:

****************** ASTERISK CLI

mISDN_close: fid(19) isize(131072) inbuf(0xb6fac008) irp(0xb6fac008)
iend(0xb6fac008)
 == Parsing '/etc/asterisk/misdn.conf': Found
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:929 _build_general_config:
misdn.conf: "jitterbuffer=4000" (section: general) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:929 _build_general_config:
misdn.conf: "jitterbuffer_upper_threshold=0" (section: general) invalid or
out of range. Please edit your misdn.conf and then do a "misdn reload".
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:985 _build_port_config:
misdn.conf: "echocancelwhenbridged=no" (section: default) invalid or out of
range. Please edit your misdn.conf and then do a "misdn reload".
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=3,4,5,6,7,8" (section: TEports) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=4,5,6,7,8" (section: TEports) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=5,6,7,8" (section: TEports) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=6,7,8" (section: TEports) invalid or out of range. Please
edit your misdn.conf and then do a "misdn reload".
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=7,8" (section: TEports) invalid or out of range. Please
edit your misdn.conf and then do a "misdn reload".
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf: "ports=8" (section: TEports) invalid or out of range. Please
edit your misdn.conf and then do a "misdn reload".
[Dec 15 12:56:44] WARNING[4170]: misdn_config.c:977 _build_port_config:
misdn.conf : "ports=(null)" (section: TEports) invalid or out of range.
Please edit your misdn.conf and then do a "misdn reload".
P[ 0] Got: 1 from get_ports
P[ 1] this is a unknown port type 0x00000000
 == Registered channel type 'mISDN' (Channel driver for mISDN Support
(Bri/Pri))
 == Registered application 'misdn_set_opt'
 == Registered application 'misdn_facility'
 == Registered application 'misdn_check_l2l1'
P[ 0] -- mISDN Channel Driver Registered --
chan_misdn.so => (Channel driver for mISDN Support (BRI/PRI))

****************** ASTERISK CLI

and in the kernel prints that in dmesg:

********* DMESG
mISDN_dsp: Audio DSP  Rev. 1.29 (debug=0x0) EchoCancellor MG2
dtmfthreshold(100)
mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies.
mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
mISDN: INTERNAL ERROR in
/data/programmi/install-misdn-mqueue/mISDN-1_1_7/drivers/isdn/hardware/mISDN/stack.c:235
st(00000100) addr(41000100) layer -1 out of range
********* DMESG

Can you help me to guess the problem?

Thanks

-- 
/*************/
nik600
https://sourceforge.net/projects/ccmanager
https://sourceforge.net/projects/reportmaker
https://sourceforge.net/projects/nikstresser
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071215/6a029c04/attachment.htm