[asterisk-users] Unicall protocol error. Cause 32776

[Luis Antonio Prata Barbosa]

Beraldi,

Do you have unused links


2007/12/11, Roger C. Beraldi Martins <rogerberaldi at gmail.com>:
>
> Dears,
>
> After having set up the board Digium TE420 to receive 3 E1s, I can receive
> calls without difficulties. As you can see in the log below:
>
>   -- Executing [5908 at from-pstn:1] NoOp("UniCall/14-1", "Catch-All DID
> Match - Found 5908 - You probably want a DID for this.") in new stack
>     -- Executing [5908 at from-pstn:2] Goto("UniCall/14-1", "ext-did|s|1") in
> new stack
>     -- Goto (ext-did,s,1)
>     -- Executing [s at ext-did:1] Set("UniCall/14-1", "__FROM_DID=s") in new
> stack
>     -- Executing [s at ext-did:2] GotoIf("UniCall/14-1", "0 ?cidok") in new
> stack
>     -- Executing [s at ext-did:3] Set("UniCall/14-1",
> "CALLERID(name)=4133602900") in new stack
>     -- Executing [s at ext-did:4] NoOp("UniCall/14-1", "CallerID is
> "4133602900" <4133602900>") in new stack
>     -- Executing [s at ext-did:5] Goto("UniCall/14-1", "ivr-3|s|1") in new
> stack
>     -- Goto (ivr-3,s,1)
>     *snip*
>     -- Executing [s at ivr-3:10] BackGround("UniCall/14-1", "custom/celia")
> in new stack
>     -- <UniCall/14-1> Playing 'custom/celia' (language 'br')
>     -- Executing [h at ivr-3:1] Hangup("UniCall/14-1", "") in new stack
>     -- Hungup 'UniCall/14-1'
>     -- Unicall/14 released
>
>
> Now I am having problems to make calls using the libunicall. The problem
> is clear in this line of the full log:
>
>
> [Dec 11 10:03:54] ERROR[12935] chan_unicall.c: Unicall/1 protocol error.
> Cause 32776
>
> Searching for the error I discovered it is "Seize ack timed out", but I do
> not know exactly of what it means or how to fix it. Here is de version of
> softwares/libs I have use (http://www.voip-info.org/wiki/view/Asterisk+MFC+R2).
>
>
> asterisk-1.4.9
> spandsp-0.0.4
> unicall-0.0.5pre1
> zaptel-1.4.4
>
> I already try  using asterisk 1.4.10 but the comportment is the same. I
> don't believe the  problem is in asterisk. I think my configs are correctly
> but not sure. Attached in text file follow the tests I have done using
> testunicall, config files from zaptel.conf and unicall.conf I using on
> this solution.  More logs is in the same file.
>
> This can be caused by a problem with signaling between my settings and the
> standard of telephony service ?
>
>
> I'm using FreePBX with a Custon Trunk (Custon String Dial: UniCall/g1), my
> extensions_aditional has
> the "OUT_3 = AMP:UniCall/g1" and "OUTMAXCHANS_3 = 10".
>
> Someone has already gone through a problem like this ? I would be grateful
> if received suggestions to correct it.
>
>
> Log Full:
>
> [Dec 11 10:03:51] VERBOSE[12935] logger.c:     -- Executing [
> s at macro-dialout-trunk :32] Dial("SIP/2290-09b18a68", "UniCall/g1|300|") in
> new stack
> [Dec 11 10:03:51] DEBUG[12935] chan_unicall.c: unicall_call called - 'g1'
> [Dec 11 10:03:51] DEBUG[12935] chan_unicall.c: unicall_call caller id -
> '2290'
> [Dec 11 10:03:51] VERBOSE[12935] logger.c:     -- Called g1
> [Dec 11 10:03:51] NOTICE[12935] chan_unicall.c: Unicall/1 event Dialing
> [Dec 11 10:03:54] NOTICE[12935] chan_unicall.c: Unicall/1 event Protocol
> failure
> [Dec 11 10:03:54] ERROR[12935] chan_unicall.c: Unicall/1 protocol error.
> Cause 32776
> [Dec 11 10:03:54] DEBUG[12935] chan_unicall.c: disabled echo cancellation
> on channel 1
> [Dec 11 10:03:54] WARNING[12935] app_dial.c: Unable to forward voice or
> dtmf
> [Dec 11 10:03:54] DEBUG[12935] chan_unicall.c: Hangup: channel: 1 index =
> 0, normal = 10, callwait = -1, thirdcall = -1
> [Dec 11 10:03:54] DEBUG[12935] chan_unicall.c: Updated conferencing on 1,
> with 0 conference users
> [Dec 11 10:03:54] VERBOSE[12935] logger.c:     -- Hungup 'UniCall/1-1'
> [Dec 11 10:03:54] VERBOSE[12935] logger.c:   == Everyone is busy/congested
> at this time (1:0/0/1)
>
>
>
>
> --
> Atenciosamente,
>
> Roger C. Beraldi Martins
> Fone: 41-8828-7068
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071213/b387004a/attachment.htm