[asterisk-users] X100P Fxo card headaches

[John Millican]

See Inline

On Tuesday December 11 2007 2:20 pm, Jonn R Taylor wrote:
> The old x100p cards where 5 volt pci cards. I had this same problem and it
> was the type of pci slot that I had the card plugged into.
>
> Jonn
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Chris Boczko
> Sent: Tuesday, December 11, 2007 1:02 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] X100P Fxo card headaches
>
> Hello List,
>
> Thanks for the replies...currently
>
> Still doing the same after adding channel=1 to the /etc/zaptel.conf
>
> my zapata.conf looks like
>
> orange:~# more /etc/asterisk/zapata.conf
> [trunkgroups]
> [channels]
> usecallerid=yes
> hidecallerid=no
> callwaiting=no
> threewaycalling=yes
> transfer=yes
> echocancel=yes
> echotraining=yes
> context=incoming
> signaling=fxs_ks
> group=1
> channel=>1
I believe this should be channel=1 

JohnM

>
> orange:~#
>
> Im getting pretty sure now that its the card, i borrowed a TDM400B
> (the 3port model) from a friend, and it came up just fine (with a
> quick change to zaptel.conf and zapata.conf)....im thinking..... duff
> card
>
> Ive got a linksys SPA-3102 on order to replace this card...
>
> but i would still like to confirm if it is the card thats duff or
> something with my config, more of a "geeky pride" excercise than
> anything else.
>
> Cheers
>
> Chris
>
> On 11/12/2007, Drew Gibson <drew at oanda.com> wrote:
> > Chris Boczko wrote:
> > > Hello List,
> > >
> > > Im just dipping my feet into the asterisk world, and im having major
> > > fxo problems
> > >
> > > Im running Asterisk (from svn) + libpri (from svn) + asterisk-addons
> > > (from svn) + asterisk gui (svn 1.4 branch) + zaptel (svn 1.4) on a
> > > Debian Etch box, with 1gb ram, running all of the services for my home
> > > server (web / db / music server etc), and i would like to run my PSTN
> > > line from Kingston Comms, but i can't get this box the recoginsie this
> > > line!
> > >
> > > The X100p is a cheap clone i got off ebay for a tenner, so im not
> > > expecting much, i know they have echo issues, but im going to upgrade
> > > to a SPA3012 / TDM400B when i have the cash.
> > >
> > > Ztcfg -vv reports
> > >
> > > orange:~# ztcfg -vv
> > >
> > > Zaptel Version: SVN-branch-1.4-r3374
> > > Echo Canceller: MG2
> > > Configuration
> > > ======================
> > >
> > >
> > > Channel map:
> > >
> > > Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> > >
> > > 1 channels to configure.
> > >
> > > orange:~#
> > >
> > >
> > > and my zaptel.conf file contains
> > >
> > > orange:~# more /etc/zaptel.conf
> > > fxsks=1
> > > loadzone=uk
> > > defaultzone=uk
> > > orange:~#
> > >
> > > but zap show status in the command line shows
> > >
> > > orange*CLI> zap show status
> > > Description                              Alarms  IRQ    bpviol CRC4
> > > Fra Codi Options  LBO
> > > Wildcard X100P Board 1                   OK      0      0      0
> > > CAS Unk  YEL      0 db (CSU)/0-133 feet (DSX-1)
> > > orange*CLI>
> > >
> > > and i think the Unk means unknown...?
> > >
> > > Does anyone have any ideas on how to get this line to work, ive
> > > followed every howto i can find, and google seems to be comming up
> > > short, as far as i can see, ztcfg should report the card as
> > > configured, but it isn't, and ive no idea why.
> > >
> > > Hope you can help
> > >
> > > Chris
> >
> > Try adding channels=1 to the end of your zaptel.conf to assign the
> > settings you have made to a channel.
> >
> > regards,
> >
> > Drew
> >
> > --
> > Drew Gibson
> >
> > Systems Administrator
> > OANDA Corporation
> > www.oanda.com