[asterisk-users] using modem with asterisk

[Rizwan Hisham]

Sorry for my late reply:
Here is my zapata.conf

usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
 define channels
context=incoming ; Incoming calls go to [incoming] in extensions.conf
signaling=fxs_ks ; Use FXS signaling for an FXO channel
channel => 2

and zaptel.conf

fxsks=2
loadzone=us
defaultzone=us

and lspci output is:

06:00.0 Communication controller: Intel Corporation 536EP Data Fax Modem
        Subsystem: Intel Corporation: Unknown device 1000
        Flags: bus master, medium devsel, latency 32, IRQ 209
        Memory at fe000000 (32-bit, non-prefetchable) [size=4M]
        Capabilities: [e0] Power Management version 2

and /proc/zaptel/1 contains only this:
Span 1: ZTDUMMY/1 "ZTDUMMY/1 (source: Linux26) 1"


On Dec 8, 2007 8:31 PM, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:

> On Sat, Dec 08, 2007 at 04:11:03PM +0100, Luis Carlos Martos Ratías wrote:
> > Perhaps if you use the app "genzapteconfig" it makes your config easier.
> >
> > (Excuse me about my poor english)
>
> genzaptelconf will not find it if it does not appear under /proc/zaptel
> . And if it does not appear in zttool it will not appear in
> /proc/zaptel .
>
> --
>               Tzafrir Cohen
> icq#16849755              jabber:tzafrir.cohen at xorcom.com
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Best Regards
Rizwan Hisham
Software Engineer
Axvoice Inc.
www.axvoice.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071211/f572d6ed/attachment.htm