[asterisk-users] Problem with the ring timeout in dial command for local extensions

[tloginbr-asterisk at yahoo.com.br]

Hi all,

I don't know if this is the right list to ask, since
I'm using Trixbox version 1.0.0.28, that has asterisk
1.2.17.
I'm trying to configure the ring timeout value for my
local extensions (when dialing from one to another),
and the dial command simply ignores my values... I
have one extension 0017 in my box, so I used the
command Dial(SIP/0017|100|rTtWw) to dial to it. The
call gets completed without a problem, but it only
rings for 30 seconds, when it should ring for a 100
seconds. I'm pretty sure this is my mistake here, but
I didn't find a solution. I also tried changing the
value directly in trixbox web interface that says
"Number of seconds to ring phones before sending
callers to voicemail" and nothing happens. I know that
trixbox does weird things to my configuration files,
but I edited extenions.conf, since it does not get
messed up by trixbox.

If I use the dial command to dial out with my
termination provider (runs on IAX2) the timeout option
works just fine.

All help is very welcome,

Thiago


      Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento!
http://br.mail.yahoo.com/