[asterisk-users] Increasing the voice volume for digium card

[bilal ghayyad]

In the rxgain and txgain or fxs_rx and fxs_tx?

And what is the utilization of ztmonitor in this case?


Regards
Bilal

---------------

Hi there,

Have you mentioned to the last email by Matthew? He
told you can
 achieve what you need through setting rxgain and
txgain for each channel in
 zapata.conf (It means you have control each channel
seperatly even on a
 card)

Regards.
--
M. Shokuie Nia,
SENA CO.

> Date: Thu, 6 Dec 2007 03:52:04 -0800
> From: bilmar_gh at yahoo.com
> To: asterisk-users at lists.digium.com
> CC: creslin at digium.com
> Subject: Re: [asterisk-users] Increasing the voice
volume from the
 digium card
>
> Dears;
>
> I have one TMA22B card, I need to increase the
volume
> on the caller side (the voice that come from
asterisk
> to caller, while caller is using his mobile by
dialing
> to asterisk to the fxo port), these ports are the
3rd
> and 4th ports.
>
> Do I have to run:
>
> /usr/src/asterisk-1.4/zaptel-1.4/ztmonitor 3 -vv
> and:
> /usr/src/asterisk-1.4/zaptel-1.4/ztmonitor 4 -vv
>
> Also, what should I write in my zapata.conf file?
The
> fxs_rx: ? Is it to be the Rx reading of the previous
> commands or more if I need to increase the voice
> volume?
>
> What if I have another TDM22B card, and I need to
> increase the voice volume at port 3 and 4 of that
> second card, what the attribute to be bypass for the
> above commands?
>
> Your kindly help is high appreciated.
> Regards
> Bilal
>
> bilal ghayyad wrote:
>> Hi List;
>>
>> Anyone knows a method (command) to increase the
> voice
>> volume at diguim card level?
>
> Are you trying to do this at some other level than
> rxgain and txgain
> settings in zapata.conf?
>
> If so, for the analog cards there are some module
> parameters for doing
> so. For digital T1/E1 cards, the only way to do it
is
> with the gain
> options in zapata.conf.
>
> --
> Matthew Fredrickson
> Software/Firmware Engineer
> Digium, Inc.
>
> ----------------------
>
> ------------------------
> In zapata.conf you can add rxgain and txgain
settings
> and use
> ztmonitor to get it set. There are some more details
> on this on
> voip-info.org.
>
> On Nov 29, 2007 1:49 AM, bilal ghayyad
>  wrote:
>> Hi All;
>>
>> I have an IP Trunk established between Asterisk and
>> the VoIP service provider, when call from my mobile
> to
>> the PBX and then enter the destination number to
> call
>> via the VoIP, I got a connection but the voice
level
>> volume need to be increased, I am trying to find if
>> zaptel (diguim card) can increase the volume (if
> there
>> is any command can do that)? And if that volume
> level
>> is possible to be applied only for that IP Trunk
and
>> not for others.
>>
>> Any Help?
>> Regards
>> Bilal



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ