[asterisk-users] IBM x3400 w/ Digium TE220

[Edwin Lam]

hi folks.

i have a Digium TE220 PCI-E 2 port T1/E1 controller installed
in an IBM x3400 server. i load the wct4xxp driver seems ok.
but when i execute "ztcfg -vvv" command. the kernel panic.
i tried zaptel 1.2.21 & 22. they have the same result.
following is my zaptel.conf:

loadzone=cn
defaultzone=cn
span=1,1,0,ccs,hdb3
span=2,0,0,esf,b8zs
bchan=1-15
dchan=16
bchan=17-31
fxoks=32-55


any clues?

p.s. the same setting works fine on HP Proliant server.

-- 
Edwin Lam <edwin.lam at officegeneral.com>
Systems Engineer, Office General, Inc.
Ph: +1 415 439 4988 Fax: +1 415 283 3370
http://pgpkeys.mit.edu:11371/pks/lookup?op=get&search=0xD6506D20