[asterisk-users] Polycom and NAT
Klaverstyn, David C
David.Klaverstyn at intergraph.com
Wed Aug 22 07:32:59 CDT 2007
I have both of those command lines for my natted sip device.
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Darryl
Dunkin
Sent: Wednesday, 22 August 2007 1:24 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Polycom and NAT
In your sip.conf, for the user:
nat=yes
To send keepalives for the UDP connection (depending on how flimsy the
device handling NAT is):
qualify=yes
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
Klaverstyn, David C
Sent: Tuesday, August 21, 2007 17:51
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Polycom and NAT
Hi All,
I have a Polycom 501 that is behind a NAT. When it registers to the
Asterisk server it is using the IP address on the private network and
not the public IP of the NAT address.
Can someone tell me what I need to do so the phone registerers using an
internet address rather than the remote network NAT address.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070822/20648dbe/attachment.htm
More information about the asterisk-users
mailing list