[asterisk-users] TDM2400P

[David Gagnon]

I had a similar problem and the problem was the hardware echo can who was
defect. Try removing the echo can hardware echo can and test the line.

 

David

 

  _____  

De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de Robson
Ribeiro
Envoyé : 21 septembre 2006 12:28
À : asterisk-users at lists.digium.com
Objet : [asterisk-users] TDM2400P
Importance : Haute

 

Hi all, I have a TDM2400P w/ echo cancellation, 8 FXSs and 8 FXOs. They are
installed respectively on banks 1,2,5 and 6. The problem I am having is that
when I make a call using the ZAP channel, I can hear perfectly but the
person on the other end is hearing my voice with lots of ticks. It would
seem I am making this call over a very bad bandwidth which is not the case
since this is the PSTN. My configuration files are below, I have the latest
versions of Zaptel, Libpri and Asterisk. I am using Polycom’s IP301 and
IP430 Phones. I would appreciate help since I have to put this in production
on Saturday. 

 

# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg 
#
#

loadzone = us
defaultzone=us
fxsks=1-4
fxsks=5-8
fxoks=17-20
fxoks=21-24

================

Zapata.conf


[channels]
language=en
context=default
;switchtype=national
echocancel=64 
echocancelwhenbridged=no
echotraining=800
toneduration=200
busydetect=yes
signalling = fxs_ks
rxgain=5.0
txgain=-10.0
channel => 1-4
channel => 5-8
signalling = fxo_ks
channel => 17-20 
channel => 21-24

 

 

Best Regards,

 

Robson Ribeiro

MSN: robrib2002 at hotmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060921/6c11a945/attachment.htm