[Asterisk-Users] Sirrix BRI errors

[Klaus Darilion]

garth at bitco.co.za wrote:
> Hi
> 
> I have a test setup of a sirrix card installed in NT mode connected to a
> PBX.  I keep getting the following error:
> 
>    D-Channel receive message aborted, discarding frame (RSTAD=0x1c)
> 
> What does this mean?  What could be causing it?

The answer comes a little bit late, but still good for the archives:

You have to activate termination of the ISDN line (activate the jumpers 
on the Sirrix card).

regards
klaus