[asterisk-users] What don't I get about SIP?

[Mike]

Here it is:


 <dialplan dialplan.impossibleMatchHandling="1"
dialplan.removeEndOfDial="1">
      <digitmap dialplan.digitmap="[7]xx|[9]xxxxxxxxxxT|[9][1]xxxxxxxxxxT"
dialplan.digitmap.timeOut="3"/> 

When I dial 845, I get fast busy.  When I dial 9-555-555-5555, it dials
without the need to press send.  All good result.

When I dial 9-555-5 and wait, nothing happens....


Mike



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric
"ManxPower" Wieling
Sent: September 8, 2006 7:14 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] What don't I get about SIP?

What IS your Polycom dialplan, and do you have the digit.impossiblematch
set?

Eric "ManxPower" Wieling wrote:
> Then you are doing something else wrong.  If the call gets to Asterisk 
> then the exten => lines I gave should match if they are in that context.
>  I use this all the time.
> 
> Mike wrote:
>> But that's the whole freaking problem!!!
>>
>> If I could do that, I would. But Asterisk keeps on sending the "484 
>> Address incomplete" message, and the Polycom keeps on waiting 
>> silently and patiently for me to put in the needed extra digit(s).
>> When I pick up my home phone, and I forget a number, the phone 
>> company does wait a few seconds for the last digit.  But there is a 
>> timeout, and eventually I get a fast busy.  That`s what I want.  And 
>> apparently, I can`t get that.
>>
>> Mike
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric 
>> "ManxPower" Wieling
>> Sent: September 8, 2006 6:23 PM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] What don't I get about SIP?
>>
>> Not much you can do about that other than:
>>
>> exten => _X.,1,Playback(dial-real-number-you-moron)
>> exten => _X.,2,Hangup
>>
>> Mike wrote:
>>> That's a good idea, and I tried, but as far as I know the digitmap 
>>> setting of the Polycom allows me to enable the phone to dial 
>>> automatically after a pattern is used (ex : [9]xxxxxxxxxx), but it 
>>> doesn’t allow me to consider a too short string as being invalid (ex 
>>> if I miss a digit and just dial
>>> 9-555-55-5555 and then press "send".
>>>
>>> Am I wrong? Cause did try the above example, and I got a 484 
>>> response back...
>>>
>>> Mike
>>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com
>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric 
>>> "ManxPower" Wieling
>>> Sent: September 8, 2006 5:49 PM
>>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>>> Subject: Re: [asterisk-users] What don't I get about SIP?
>>>
>>> Mike wrote:
>>>> It's not a silly idea, I've been doing some sniffing and debugging 
>>>> with my limited knowledge of the whole process.  I found this in 
>>>> the debug stream after having dialed "965").
>>>>
>>>> Notice this line: SIP/2.0 484 Address Incomplete.
>>>>
>>>> Is this what I was suspecting, that it knows it could match a 
>>>> pattern
>>>> (_9XXXXX) with a few more digits and so waiting for those digits 
>>>> from the user?  How can I disable this or turn it off?  The Polycom
>>>> 501 "supports 484 responses", but how can I either:
>>>> 1) Disable it in the phone
>>>> 2) Disable it in Asterisk
>>> I didn't even know that Polycom supported 484.
>>>
>>> Update the dialplan on your Polycom to make sure it will never send 
>>> a partial number.  You will no longer have to press Dial then either.
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>> _______________________________________________
>>> --Bandwidth and Colocation provided by Easynews.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users