[asterisk-users] Re: No such device -> TDM13B

[Iván Vega R.]

Upon further investigation, I tried the following:

lsmod | grep 'wc*'

I can see wctdm (I believe this is the fxs module, no?), wcfxo,
zaptel... so I think so far so good. Then:

cat /proc/interrupts

There I only see the wctdm:

50:    9556184          0   IO-APIC-level  uhci_hcd:usb3, wctdm

I reckon I should move the card to another slot or somehow disable the USB port?

Also, wcfxo does not show up on the list, and I can see on the card
that the FXO port (I'm guessing it's that port) is not lit, while the
other 3 are. So I'm guessing it didn't get installed or something?

The plot thickens... Does anyone have any idea what the problem could be?

Thanks!

On 9/8/06, Iván Vega R. <contacto at ivanvega.name> wrote:
> Hi again!
>
> So while ztcfg ran without errors, now asterisk won't run. Here's the
> relevant part of the error:
>
> WARNING[13055]: chan_zap.c:921 zt_open: Unable to specify channel 1:
> No such device
> ERROR[13055]: chan_zap.c:6879 mkintf: Unable to open channel 1: No
> such device here = 0, tmp->channel = 1, channel = 1
>
> Now I'm totally lost, so any help is really appreciated.
>
> Thanks!
>
> Ivan V.
>