[asterisk-users] TDM400 and T100 config on same asterisk

[Rich]

I do not seem to be able to get this right... after much reading and trying...
any suggestions would be much appreciated.

I have 2 ports on a TDM400 working... 
now I want to bring my T100 with PRI online in the same machine...
using Asterisk 1.2.10

ztcfg is complaining see below... and I cannot find a reference to the error.

Thanks for any help,
Rich


= = =

[root at aster3 asterisk]# ztcfg -vvv

Zaptel Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: Clear channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: D-channel (Default) (Slaves: 26)

26 channels configured.

ZT_SPANCONFIG failed on span 1: Invalid argument (22)
[root at aster3 asterisk]#

[root at aster3 asterisk]# cat zapata.conf
[trunkgroups]
; define trunk groups here

[channels]
; hardware channels
; default
language=en
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
immediate=yes

; define channels

context=incoming
signalling=fxs_ks
channel => 1 ;FX0

context-incoming
signalling=fxo_ks
channel => 2 ;FXS

switchtype=dms100
signalling=pri_cpe
context=incoming
group=1
channel => 3-25

[root at aster3 asterisk]#


[root at aster3 asterisk]# cat /etc/zaptel.conf
#
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

loadzone=us
defaultzone=us

fxsks=1 #FXO Red
fxoks=2 #FXS Green

span=1,1,0,esf,b8zs
bchan=3-25
dchan=26

[root at aster3 asterisk]#