[asterisk-users] Sipura SPA3000

[Rich Adamson]

That option addresses what to do with the fxs (line 1) when the 
registration fails as opposed to what does the fxo (pstn line) does when 
registration fails.


Bob Chiodini wrote:
> Rich,
> 
> After reading a little more, how about the "Line 1 VoIP Fallback to
> PSTN" (section 4.9)?  It looks like this is invoked when the Ethernet
> link is down or registration fails.  I don't have a SPA3000 up at the
> moment to look at what's required.
> 
> Bob...
> 
> On Fri, 2006-09-01 at 11:45 -0500, Rich Adamson wrote:
>> If "pstn call ring thru line 1" is enabled, all incoming pstn calls will 
>> ring through to the fxs port (and not to asterisk). The OP was looking 
>> for a auto fail over function that essentially would be "pstn call ring 
>> thru line 1 on sip failure". That doesn't exist.
>>
>>
>> Bob Chiodini wrote:
>>> Probably the PSTN Call Ring Thru Line 1 feature.  Section 4.11 in:
>>>
>>> http://www.sipura.com/Documents/SipuraSPAUserGuidev2.0.9.pdf#search=%22spa3000%20manual%22
>>>
>>> By default, if my asterisk went down after the SPA3000 was already
>>> registered, the in-bound PSTN call was lost.  I probably did not wait
>>> long enough and I did not have "PSTN Call Ring Thru Line 1" enabled.
>>>
>>> Bob...
>>>
>>> On Fri, 2006-09-01 at 10:32 -0400, Kevin Collins wrote:
>>>> My 3000 does this natively without config. 
>>>>
>>>>
>>>> Kevin Collins
>>>>  
>>>>
>>>> -----Original Message-----
>>>> From: asterisk-users-bounces at lists.digium.com
>>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Steve Kennedy
>>>> Sent: Friday, September 01, 2006 10:03 AM
>>>> To: asterisk-users at lists.digium.com
>>>> Subject: Re: [asterisk-users] Sipura SPA3000
>>>>
>>>> On Fri, Sep 01, 2006 at 08:11:50AM -0500, Rich Adamson wrote:
>>>>
>>>>>>   I have a question on configuration of SPA3000 with asterisk.
>>>>>>   1. I want all incoming calls are redirected from SPA3000 to my
>>>>>>      asterisk server.
>>>>>>   2. Asterisk then should direct this call to my SIP phones (including
>>>>>>      Sipura)
>>>>>>   3. In case asterisk server is down I want that call be directed
>>>>>>      straight to the handset connected to the Sipura Is this 
>>>>>> configuration possible?
>>>>> The spa3000 does not have logic in it to support #3.
>>>> I thought the SPA3K could do this, i.e. on power failure or non-ability to
>>>> connect to server, connect FXS to FXO.
>>>>
>>>>
>>>> Steve