[asterisk-users] ASTERISK NOT LISTENING IN PORT 5060

[Bob Chiodini]

I think all anywhere should allow 5060.  Try running service iptables 
stop (as root) to shutdown the firewall.  See if 5060 then answers.

I'm not running a firewall on my asterisk box so I'm not sure what the 
rule would need to be.  service iptables start will restore the firewall.

Bob...

Elpidio Ramos wrote:
> Bob,
>  
> I get the same answer you get when using netstat -an
>  
> When I query the firewall rules I get this:
> Chain RH-Firewall-1-INPUT (2 references)
> target     prot opt source               destination        
> ACCEPT     all  --  anywhere             anywhere           
> ACCEPT     icmp --  anywhere             anywhere            icmp any
> ACCEPT     ipv6-crypt--  anywhere             anywhere           
> ACCEPT     ipv6-auth--  anywhere             anywhere           
> ACCEPT     udp  --  anywhere             224.0.0.251         udp dpt:5353
> ACCEPT     udp  --  anywhere             anywhere            udp dpt:ipp
> ACCEPT     all  --  anywhere             anywhere            state 
> RELATED,ESTABLISHED
> ACCEPT     tcp  --  anywhere             anywhere            state NEW 
> tcp dpt:ssh
> ACCEPT     tcp  --  anywhere             anywhere            state NEW 
> tcp dpt:http
> REJECT     all  --  anywhere             anywhere            
> reject-with icmp-host-prohibited
>  
> I assume this indicates port 5060 is restricted?
>  
> Elpidio
>
> */Bob Chiodini <bchiodini at gmail.com>/* wrote:
>
>     Elpidio,
>
>     Is it truly not listening or is maybe a firewall blocking port 5060.
>     What does netstat -an | grep 5060 tell you? I get this:
>
>     netstat -an | grep 5060
>     udp 0 0 0.0.0.0:5060 0.0.0.0:*
>
>     iptables -L will list any firewall restrictions.
>
>     Bob...
>
>
>     On Fri, 2006-09-01 at 09:12 -0700, Elpidio Ramos wrote:
>     > Does anyone knows what could be the cause for asterisk not listening
>     > in post 5060 if SIP interfaces is loaded with no problems?
>     >
>     > I am using Fedora Core 3.
>     >
>     > I have followed the instructions in several tutorials and tried
>     > several soft phones and the SIP interface seem to be dead.
>     >
>     > 1. When loading asterisk SIP load with no problem
>     > 2. When I activate the DEBUG for a peer, ip or sip in general, I
>     don't
>     > get to see any messages when a connection is attempted from any soft
>     > phone.
>     > 3. The soft phones all report a timeout when trying to register.
>     > 4. Tried also to move to port 80 that I know is open but still the
>     > same problem.
>     >
>     > I will appreciate any help anyone can provide with this problem.
>     >
>     > Elpidio
>     > _______________________________________________
>     > --Bandwidth and Colocation provided by Easynews.com --
>     >
>     > asterisk-users mailing list
>     > To UNSUBSCRIBE or update options visit:
>     > http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> *Elpidio Ramos*
> President 
> RM International Services SA CV
> Web: http://www.ramosoft.com
> Mex:  +52 (55) 5116-9804 Office
>          +52 (55) 5116-9805 Fax
>          +52 (55) 1755-6601 Cell
> USA: +1 (801) 494-1415 Office
>          +1 (240) 250-8264 Fax
>          +1 (801) 938-4740 Direct
>